Chemical Resistance Cup Sinks for Fume Hood
Advantages:
1. Heat resistance
It is able to withstand common laboratory temperature, and it is not flammable, has no bubbles and cracking.
2. Corrosion resistance
It has superior corrosion resistance to acid and alkali solvents commonly used in laboratory.
3. Safety and environment protection
It is non-toxic and tasteless, incombustible and insulative.
4. Durable
It is absolute moisture-proof, and no pore, and it will not delaminate, expand and deform.
5. Repairability
The whole board has same material, and it can be repaired as original when it is damaged.
6. Economic
Long life and stable, long-lasting quality, and price has an absolute advantage.
Best lab
Tested by SGS, Select high quality material with good anti-bacteria and contamination prevention performance. Strict quality control, 100% final inspection before delivery, test on site, proper design
Specification:
| Chemical Test Results for Black |
| No. | Chemical Reagent | Actual Rating |
| 1 | Acetate,Amyl | 1 |
| 2 | Acetate,Ethyl | 1 |
| 3 | Acetic Acid,98% | 1 |
| 4 | Acetone | 1 |
| 5 | Acid Dichromate,5% | 0 |
| 6 | Alcohol,Butyl | 0 |
| 7 | Alcohol,Ethyl | 0 |
| 8 | Alcohol,Methyl | 1 |
| 9 | Ammonium Hydroxide,28% | 0 |
| 10 | Benzene | 0 |
| 11 | Carbon Tetrachoride | 1 |
| 12 | Chloroform | 1 |
| 13 | Chromic Acid,60% | 1 |
| 14 | Cresol | 0 |
| 15 | Dichlor Acetic Acid | 0 |
| 16 | Dimethylformanide | 0 |
| 17 | Dioxane | 0 |
| 18 | Ethyl Ether | 0 |
| 19 | Formaldehyde,37% | 0 |
| 20 | Formic Aicd,90% | 0 |
| 21 | Furfural | 0 |
| 22 | Gasoline | 0 |
| 23 | Hydrofluoric Acid,37% | 1 |
| 24 | Hydrofluoric Acid,48% | 3 |
| 25 | Hydrogen Peroxide,30% | 0 |
| 26 | Lodine,Tincture of | 0 |
| 27 | Methyl Ethyl Ketone | 0 |
| 28 | Methylene Chloride | 1 |
| 29 | Mono Chlorobenzene | 1 |
| 30 | Naphthalene | 0 |
| 31 | Nitric Acid,20% | 0 |
| 32 | Nitric Acid,30% | 0 |
| 33 | Nitric Acid,70% | 0 |
| 34 | Phenol,90% | 0 |
| 35 | Phosphoric Acid,85% | 0 |
| 36 | Silver Nitrate,Saturated | 0 |
| 37 | Sodium Hydroxide,10% | 0 |
| 38 | Sodium Hydroxide,20% | 0 |
| 39 | Sodium Hydroxide,40% | 0 |
| 40 | Sodium Hydroxide,Flake | 0 |
| 41 | Sodium Sulfide,Saturated | 0 |
| 42 | Sulfuric Acid,33% | 0 |
| 43 | Sulfuric Acid,77% | 0 |
| 44 | Sulfuric Acid,96% | 3 |
| 45 | Sulfuric Acid,77% and Nitric Acid 70%,
equal parts | 0 |
| 46 | Toluene | 0 |
| 47 | Trichloroethylene | 1 |
| 48 | Xylene | 0 |
| 49 | Zinc Chloride, Saturated | 0 |
| Rating scale: | Level 0--No detectable change |
| Level 1--Slight change in color or gloss |
| Level 2-- Slight surface ething or severe staining |
Level 3--Pitting,cratering,swelling, or erosion of coating.Obvious and significant
deterioration |
| Acceptance level: | Laboratory grade finishes shall result in no more than four level 3 conditions.
Suitability for a given application is dependent upon the chemicals used in a given laboratory |
Description:
The main ingredients of epoxy resin board are epoxy resin, quartz sand, catalysts, curing agents and pigments, it is produced by several baking at high temperature. Its overall thickness is composed with the same material from top to bottom and from inside and outside, so it has a good stability, and it will never break if without external shocks. Because of it is formed at high temperature, the epoxy resin board and cup sink will never distortion at room temperature.
Clean:
Although ONUS epoxy resin worktop can resist most of chemicals ,please use worktop according to laboratory criterion strictly in order to guarantee worktop’s best property and appearance. Please clean it when chemicals spill, and wipe worktop everyday.
The common clean method is wipe worktop with 70% ethyl alcohol before and after use. If only remove the dirt of surface, please to wipe directly with rag. If it is stubborn stains, please clean it with organic solvent or some similar solvents firstly, then wipe surface with clean sponge.
Do not use of abrasive cleaner or abrasive sponge/brush to clean surface.
Even though epoxy resin worktops can resist most of chemicals, we still suggest to do testing to find if it is cause color fading before use.
Thanks visiting, more information please contact with us.
Product Tags:
|
|
Chemical Resistance Durable Laboratory Cup Sinks White Color For Fume Hood Images
|
